|
Product Details:
|
| Actuator Type: | Rack And Pinion | Platform: | 25×42mm |
|---|---|---|---|
| Travel Range: | ±40mm , ±65mm , ±90mm , ±69mm | Travel Guide: | Dovetail Slide Bearing |
| Load Capacity: | Parallel:3kgf(29.4N) Vertical:1.5kgf(14.7N) | Straightness: | 30μm |
| Weight: | 0.3kg | Surface Material: | Aluminum Alloy BLACK-Anodized |
X Axis Manual Linear Stage , Dovetail Slide Bearing Rack And Pinion Slide Table
Product description
X axis dovetail displacement table, the main material of the product is made of high strength aluminum alloy, the surface is treated with oxidized black, and the dovetail auxiliary guide rail is used to guide the load. Helical rack and pinion drive, fast adjustment speed. Side with scale and locking function, locking effect is good, high stability. The mounting holes with standard hole spacing are distributed on the table and base, which is convenient for installation and combination. It can be composed of multi-dimensional adjustment rack or other series products.
Product features
Gear manual translation table standard with dovetail auxiliary guide rail;
Gear manual translation platform series side pinion rack drive, built-in locking;
Stroke 40/65/90/69mm optional, larger stroke can be customized;
The horizontal load of gear manual translation table is 3kg, and the vertical load is 1.5kg.
Product specification
| Model Number | PT-DN100 | PT-DN150 | PT-DN200 | PT-DN200-2 |
| Actuator Type | Rack and Pinion | |||
| Operating Position | Center | |||
| Platform | 25×42mm | |||
| Travel Range | ±40mm | ±65mm | ±90mm | ±69mm |
| Travel Guide | Dovetail Slide Bearing | |||
| Load Capacity | Parallel:3kgf(29.4N) Vertical:1.5kgf(14.7N) | |||
| Straightness | 30μm | |||
| Weight | 0.1kg | 0.15kg | 0.2kg | 0.3kg |
| Surface Material | Aluminum Alloy-Black-anodized | |||
Product Dimension Map
Dovetail type translation platform installation method
There are four countersunk holes in each mobile platform fixed seat. The installation method is as follows:
1. Turn the micrometer screw (or other pushing device) in one direction, so that the mobile table moves to the edge, so that the mounting hole at the bottom is exposed, and then fix it with screws. Please make sure that the locking piece has been loosened before operation.
2. Turn the micrometer screw (or other pushing device) in the opposite direction, so that the edge of the moving table is exposed at the bottom of another section of the mounting hole, and fixed with screws.
Contact Person: sales
Tel: +8613691286875
