|
Product Details:
|
| Angle Adjustment Range: | ±10° | Driving Mode: | Worm Gear And Worm Drive |
|---|---|---|---|
| Height Of Center Of Rotation: | 75 Mm | Table Size: | 65mm×65mm |
| Tilt: | 60″ | Bearing Capacity: | 10kg |
| Self-weight: | 520g | Item Number: | PT-SD302 |
| High Light: | fine tuning manual goniometer stage,60 degree tilt manual goniometer stage,manual stage pitch adjustment platform |
||
Experimental Fine-Tuning ± 15 ° Manual Goniometer Stage Pitch Adjustment Platform PT-SD302
Manual goniometer stage PT-SD302 provides small Angle rotation adjustment, using fine grinding V-guide rail + ball guide rail, worm gear pair drive, comfortable movement, precision and reliable. Table smooth operation, small deflection and tilt. Manual corner stations are designed in pairs, and the rotation center is the same point after superposition, which can be adjusted by orthogonal biaxial concentric rotation. Hand wheel lock, safe and reliable. The table is placed horizontally, with standard connecting holes, and other series of products can be composed of multidimensional adjustment frame.
Manual corner table product features
1. Curved sliding table. High precision and smooth movement can be achieved.
2, excellent material. The main material is aluminum alloy with light weight.
3, higher precision. The driving mode is differential screw for higher precision.
4, widely used. Fit into other devices.
Product specification
| Model Number | PT-SD302 |
| Table size | 65mm×65mm |
| Angle adjustment range | ±10° |
| Height of center of rotation | 75 mm |
| Center of rotation deviation | φ0.05 mm |
| Driving mode | Worm gear and worm drive |
| Guide form | V-shaped guide rail+ball |
| Drive position | Central drive |
| Minimum scale | 1° |
| Minimum reading | 6′ |
| Adjustment quantity | (Reference) 3 ″/10 subdivision |
| Yaw | 80″ |
| Tilt | 60″ |
| Bearing capacity | 10kg |
| self-weight | 0.52kg |
| material | aluminium alloy |
| surface treatment | anodic oxidation |
Installation method of manual angle position stage:
1. Turn the micrometer screw rod (or other pushing device) in one direction and move it to the edge to make the bottom mounting hole leak out.
2. Fix it with screws. Before operation, make sure that the locking tab has been loosened.
3. Turn the micro-measuring screw rod (or other pushing device) in the opposite direction to move the mobile platform to the edge and make the installation hole at the bottom lead end leak out.
4. Fix with screws.
Manual angle stage product details:
1. Material. The main material is high-strength hard aluminum alloy with black anodized surface, good wear resistance and beautiful appearance.
2. Scoring. There is an angle marking on the side of the sliding table, which can accurately check and adjust the angle. The marking adopts laser marking, which is clear and wear-resistant, with small error and more accurate measurement.
3. Transmission mode. The worm gear and worm drive with precision grinding and matching has a certain self-locking ability, compact structure, more stable movement, and can be rotated forward and backward at will to cut back.
4. Locking device. Nickel plated locking screws are used together with gaskets to enhance the stability of table locking, durable, corrosion resistant and rust resistant.
5. Installation hole position. The standard installation hole position can be used alone or matched with other products of our company to form a multi-dimensional motion system to meet the project requirements.
Contact Person: sales
Tel: +8613691286875
