|
Product Details:
|
| Travel Range: | 50mm | Actuator Type: | Micrometer Head |
|---|---|---|---|
| Travel Guide: | Crossed Roller Bearing | Straightness: | 5μm |
| Min Scale: | 10μm | Platform Size: | 100mm × 100mm |
| High Light: | side drive micrometer linear stage,manual fine adjustment micrometer linear stage,optical mobile manual linear stage |
||
Micrometer Manual Fine Adjustment Mobile Platform Optical Slide Stage
Features of manual slide stage
The cross roller guide rail can realize high-precision and smooth movement.
The main material is aluminum alloy, which is light and suitable for other devices.
Table size 100mm * 100mm
The differential head is used for lateral drive.
Type and characteristics of slide guide
Cross guide rail type: high precision, easy to adjust preload.
Steel bar ball type: light weight, smooth movement, light load, low price.
Linear ball type: high precision, high rigidity, thin type.
Dovetail groove type: large movement, fast movement and high working frequency.
Manual slide stage product specification
| Model Number | PT110-50-100CH |
| Travel Range | 50mm |
| Actuator Type | Micrometer Head in Center |
| Travel Guide | Crossed Roller Bearing |
| Platform Size | 100mm × 100mm |
| Straightness | 5μm |
| Parallelism | 10μm |
| Minimum Adjust Distance | 2μm |
| Minimum Scale | 10μm |
|
Driving Parallelism |
15μm |
| Pitching | 25″ |
| Yawing | 15″ |
| Material – Finish | Aluminum Alloy - Black-Anodized |
| Load capacity | 40Kg |
| Weight | 1.1kg |
Dimension drawing of manual slide stage:
Manual slide stage installation method
Move the platform surface to the limit position and expose two mounting holes. Please put the matching bolts in the hole for temporary fixation. Please confirm that the bolts have completely entered the bolt mounting hole, and then proceed to the next step.
Next, please turn the micrometer head counterclockwise and move the platform surface to the limit position on the other side. The other two mounting holes will be exposed on the opposite side of the position just now. Please put the matching bolts in and tighten them to a certain extent. After confirming that it is consistent with the installation position, first fully fix the bolts of the two mounting holes, and finally fix the bolts of the two mounting holes before fixing.
Contact Person: sales
Tel: +8613691286875
