|
Product Details:
|
| Platform Size: | Ø106.1mm | Travel Range: | Linear 13mm, 360 ° Rotation |
|---|---|---|---|
| Indexing Accuracy: | Micrometer Head Indexing 10μm, Rotation Index 2° | Thread Type: | 20 Places M4, 16 Places M6, Ø6.7 * 11.0mm Countersunk Head Groove |
| Weight: | 868.3g | Material: | 7075 Aluminium Alloy |
| High Light: | rotating platform manual stage,linear displacement manual stage,dual axis manual vertical stage |
||
PT-SD79 Two Axis Linear Displacement Stage With Rotating Platform And Perforated Top Plate
Product characteristics
1. Dual axis rotating displacement table with rotating platform and detachable perforated top plate;
2. 360 ° continuous rotation;
3. Has a linear stroke of 13mm along the X and Y axes;
4. Equipped with SM1 (1.035 "-40) threaded center hole and 2 snap rings;
5. The height from the bottom to the installation plane is 25.4mm, and the height from the perforated top plate is 32.2mm;
6. Equipped with positioning pins for aligning standard glass slides on the through-hole of the platform.
Product parameters
|
Model Number |
PT-SD79 |
|
Platform Size |
Ø106.1mm |
|
Travel Range |
Linear 13mm, 360 ° rotation |
|
Indexing Accuracy |
Micrometer head indexing 10μm, Rotation index 2° |
|
Thread Type |
20 places M4, 16 places M6, Ø6.7 * |
|
Weight |
868.3g |
|
Material |
7075 Aluminium Alloy |
Product Dimensional Drawing
Two axis linear displacement stage provides a 13mm stroke along the X-axis and Y-axis micrometer heads, with a division of 10 μ m. And there is an SM1 threaded hole (1.035 "-40) in the center, which is very suitable for imaging applications that require illumination from the bottom of the sample. Coupled with a microscope slide clamp, it is designed to hold various sizes of microscope slides and test targets. (With the accompanying three positioning pins, it is easy to operate or position the slide.)
The movement of the displacement table on the X and Y axes will not affect the central threaded hole. The displacement table is fixed in position by springs on the driver, so there is no need to lock screws.
The rotating table size of the PT-SD79 displacement stage is 106.1mm, and the 360 ° continuous angle scale on the outer edge is convenient for users to set the angle direction of the displacement table, with a graduation of 2 °. A 2mm hexagonal locking screw can be used to lock the rotation position at the mark "LOCK". Locking the rotation axis does not hinder translation along the X and Y axes.
There is also a series of M6 and M4 threaded hole arrays on the displacement table for installing samples and components. At the same time, a conversion board is provided to convert the surface of the threaded hole into a flat surface, making it convenient for users to convert the surface of the screw hole of the displacement table into a flat surface.
Contact Person: sales
Tel: +8613691286875
